Recycling / Paper / Plastic / Glass/ Wood /Metals

SMICO vibratory screeners and feeders are used currently in operations recycling glass, rubber, plastic, paper, wood and metal. Our process engineers are skilled at creating a customized solution for every application and environment. Over the last 70 years we’ve tested a wide variety of items with a wide variety of properties and challenges. We welcome the opportunity to consult with you on your next project. Come see why 94% of our customers give us a perfect 10 out of 10!

DH2 SERIES VIBRATING SCREENER

The SMICO DH2 SERIES is a two or four bearing inclined screener. It was previously used for Liquid/Solids separations and now has been fully engineered to provide an extremely durable unit for various recycling applications abrasive products and other high volume rugged applications. This screener is ideally suited to handle through put volumes from 20TPH to over 1000TPH.

The top or centroid brute force drive uses dependable grease lubricated bearings, sealed on both sides to prevent contamination. The drive can be set up to provide a uniform circle or elliptical action, long or short stroke with corresponding low or high speed to best handle your screening requirements.

The SMICO DH2 SERIES is manufactured in carbon or stainless steel. A full selection of custom fit options are available. Isolation springs are provided on a wide flange beam skid base. Legs, stands, and cable suspension are available. Drive components and enclosed guards are standard. Screens in a wide range of meshes, openings and materials are available.

SMICO DH2 SERIES Screeners have been used for:

• Glass
• Aggregate
• Rubber Recycling
• Asphalt RAP Plants
• Paper Pulp Dewatering
• Mobile Screening Plants
• Shredded Plastics
• Trash Recycling
• Concrete Recycling
• Foundry Sand

   Vibrette DH2 Brochure (1,102 KB)

HORIZONTAL VIBRATING SCREENER

The SMICO HORIZONTAL or Linear Drive Screener is available with all of the features and options of the SMICO VIBROSET™ and SMICO DH2™ SERIES of declined screeners. This unit is powered by either dual motors or twin shafts which can be top or bottom mounted. The screens motion is a 45ｺ angle to push the product through the screen or out of the end.

The powerful linear drive allows the machine to screen uphill, horizontally or downhill. The uphill feature makes installation in tight clearance areas possible. The unique forces from this drive make it ideal for liquid/solids separations even for sticky products. The SMICO HORIZONTAL Screener can overcome uneven feeding which makes it ideal for recycling applications and foundry shake-out installations.

Available options include:

• Open style, partially or total enclosed
• Carbon or Stainless Steel
• Special Linings
• Access/View Ports
• Screen Dams/Wipers for sticky products.

   Horizontal Vibrating Screener Brochure (299 KB)

VIBROSET™ VIBRATING SCREENER

SMICO VIBROSET™ is a light duty, two bearing screener with a centroidally mounted drive. It features a positive eccentric action for smoother operation, meaning less vibration transmission. These units utilize sealed-for-life bearings.

SMICO VIBROSET's™ have helped processors for over 60 years. Many of them are still in use today.

Some standard and optional features include:

• Sizes from 1 ft to 3 ft wide & from 3 ft to 7ft long
• Can be manufactured with open, hoppered or enclosed bodies in Carbon or Stainless Steel
• Can be equipped with one, two or three screen decks
• Clearance can be added above, below or between the decks to flow bulky products
• Discharges can be lip type or spouts in various diameters
• Fines usually discharge from the bottom, but can be brought out of the end
• Feed can be through the cover or a feed end plate

SMICO VIBROSET™ Screeners can be used for:

• General, Light Duty or Low Volume Recycling Applications
• Ceramic Applications
• Rubber Recycling
• Plastics
• Paper/Plastics Recycling

   VIBROSET Brochure (394 KB)

VIBRATORY FEEDERS/SCALPERS

SMICO VIBRATORY FEEDERS are built with the same commitment to quality and design as our screeners. These units are ideally suited to provide maximum output for recycling and heavy duty bulk material processors in a variety of industries. SMICO VIBRATORY FEEDERS are built in sizes which can handle from 5-250 TPH. SMICO VIBRATORY FEEDERS can be built with either twin vibratory motors or with our standard counterweighted, belt driven shaft.

SMICO VIBRATORY FEEDERS come with a variety of customizable features. They can be manufactured with screens for a scalping process or they can be manufactured with a pan and sidewalls for a conveying process. SMICO Feeders come in either carbon steel construction or stainless steel for abrasive or food-grade applications.

SMICO offers testing of your product to ensure that the screen we recommend is optimally designed for your specific application. Call one of our process engineers today to discuss your needs today!

SMICO VIBRATORY FEEDERS have been used for:

• Abrasives
• Glass
• Ceramic Applications
• Scalping Applications
• Crumb and Shredded Rubber
• and many others!

Download General Brochure

VIBROFINISHER

SMICO vibrating screeners provide LOW Operating Cost, Excellent Product Classification and High Production with Minimum Maintenance.

The SMICO VIBROFINISHER is a drum tumbler for deburring and/or polishing production runs of small parts.

   VIBROFINISHER Brochure (459 KB)

BISON CRUSHER

SMICO vibrating screeners provide LOW Operating Cost, Excellent Product Classification and High Production with Minimum Maintenance.

The SMICO BISON CRUSHER is an exceptionally strong, horizontal crusher, as well as a heavy duty machine with a wide range of uses. It is designed for reducing free flowing material to a desired uniform degree of finer product. The SMICO BISON CRUSHER is also easily and quickly set up, and it can be adjusted to grind fine or coarse while machine is running. The SMICO BISON CRUSHER also handles a wide range of material.

   BISON CRUSHER Brochure (295 KB)

FRACTIONATOR

The SMICO FRACTIONATOR is trusted by some of the most prestigious labs to meet the standards of even the most exacting local, state and federal governments and regulatory bodies. The Fractionator provides “real world” lab results when running tests on samples unlike the normal test sieve products that give exacting measurements.

Specifications:

• Available in either Four or Six Separate Screen Decks
• Each deck has an individual Discharge Chute
• Also has a bottom Discharge pan for fine Materials
• Decks Slide in & out Easily
• Frame is made of Heavy Carbon Steel
• Drive System is a Centroidal Mounted SMICO Vibroset with counter-balanced eccentric and adjustable stroke
• Bearings are SMICO 60mm grease lubricated and sealed for life
• Motor is 1 HP, TEFC, 1750 RPM, 115 VAC/single-phase/60Hz
• Available in a full range of screens

The Fractionator breaks up to 25 Gallons of product and Dispenses 6 individual fractions in 30 Seconds!

    FRACTIONATOR Brochure (689 KB)