Linear Screeners - Celebrating over 70 Years of Business!

Horizontal Vibrating Screener

The SMICO HORIZONTAL or Linear Drive Screener is available with all of the features and options of the VIBROSET™ and GYRETTE™ series of declined screeners. The dual motor or twin shaft driven unit can be mounted on the top or bottom. The screens motion is a 45ｺ angle to push the product through the screen or out of the end.

The powerful linear drive allows the machine to screen uphill, horizontally or downhill. The uphill feature allows its installation in tight clearance areas. The unique forces from this drive make it ideal for liquid/solids separations even for sticky products. The HORIZONTAL Screener can overcome uneven feeding which makes it ideal for dump-in stations and foundry shake-out installations. Occasionally the strong forces of this drive will reduce the accuracy of the separation of light material by driving the particles across the screen without their passing through. In these cases, special features like screen dams or wipers must be used to slow the momentum of the material. The top or bottom mounted drive makes this the ideal choice for bulky, dusty, hot and cold products as well as wet and sticky materials.

Available options include:

Open style, partially or total enclosed
Carbon or Stainless Steel
Special Linings
Access/View Ports

Horizontal Vibrating Screener Brochure (299 KB)

DF MAX High-Volume Batch Scalper

SMICO introduces the DF MAX Batch Scalper, which provides one of the highest production rates of any dust controlled batch dumping station on the market.

Available in 3x4 and 3x6 models, the DF Max can process up to 20,000 pounds per hour, more than twice the volume of similar models.

The ergonomic design of the DF MAX includes a waist-high bag shelf, hinged product zone cleanout panels with quick-release clamps, dual side doors for easy access to filter chamber and the dust filter cartridges for quick change out. The self-cleansing filter system is outfitted with an adjustable timer that controls the pulsing jet-air blasts, which knocks loose trapped particles that are then reclaimed. From the operating floor, all important functions are within arm's reach of the operator.

Its small footprint, low-profile horizontal vibrating screen, and discharge outlet location options make the DF MAX a flexible solution for many situations where high volume, safety and efficiency are important. Industrial, 3A Dairy, FDA, and other sanitary standard finishes are available.

General

Ergonomic design for ease of operation and operator safety
Minimal plant floor operating space required
Hinged product zone cleanout panels with quick-release clamps
Easy-access filter cartridge chamber
Operating weight: 3600 lbs.
Low discharge port allows for easy connections
Industrial, 3A Dairy, FDA, and other sanitary standard finishes
OPTIONS
- Hydraulic drum or tote lift includes clean seal discharge spout and material receiving hopper for dust controlled transfer

Dust Collector

Maximum dust collection and reclamation
Pulsing jet-air cleansing system with adjustable timer
Air / Filter resistance gauge
High-efficiency filter cartridges
Integrated 2HP 3000 CFM vacuum blower fan
Dual side door access to filter cartridge chamber
Overhead access door to pulsing jet-air cleansing system
OPTIONS
- Bag filter dust collection system

Vibratory Screen

Low profile horizontal vibrating screen
Two high-efficiency ｽ HP motors - 1293 RPM
Drive: 3/16 stroke, inertially coupled linear drive
Screen cloth: mesh stainless steel FDA / USDA epoxy bonded to pre-tension deck. We offer screen mesh based on customer specified application.
Removable stainless steel safety grate
Hinged product zone cleanout panels with quick-release clamps
Inspection / clean out port
OPTIONS
- Standard magnetic grate
- Rare earth magnetic grate
- Oval discharge spout
- Discharge outlet location
- Various screen wire cloth types and mesh sizes

Electrical Requirements

Vibratory screen motors 230 / 460V, PH / 60Hz
Pulsing jet-air system 110V, 60Hz
Vacuum blower fan 230 / 460V, PH / 60Hz

DF MAX Brochure (1,101 KB)

Shale Shaker

SMICO SHALE SHAKER is a high speed, adjustable angle linear drive screener set up for oil field service. SMICO SHALE SHAKERS can be used for:

Drilling Fluids
Waste Water
Washing Recycled Plastic
Washing Aggregate

The top mounted inertia coupled dual motor drive is dependable, adjustable and simple to repair with off the shelf motors and drive components. The strong linear action conveys solids with minimum degradation. The uphill action increases fluid throughput. The deck angle is adjustable while drilling with a manually operated jack or optional electric system.

For many applications where durability, efficiency and adjustability are the primary consideration, the SMICO SHALE SHAKER is an excellent choice.

SMICO also offers Testing of your product to determine the best equipment for your application.

Shale Shaker Brochure (310 KB)

Topic Index:

Visit our sister company, Symons Screens at www.symonsscreens.com